Before seam welding, electromechanical welding, adequate preparatory work should be done. The important thing is to do a good job of checking every step and every setting to ensure that everything is normal for the power circuit, air source, instrument panel, and power switch. The following seam welding machine manufacturers will give you a detailed introduction in advance about the responsibilities of seam welding, electromechanical welding and welding.

The responsibilities of the seam welder's pre-welding preparation work are as follows:

1. Be sure to strictly inspect the seam welder and its auxiliary machinery and equipment to ensure the normal operation of the seam welder's power circuit, water circuit, gas supply, and mechanical equipment.

2. Check and ensure that the instrument panel, power switch, buttons, knobs, gate valves, indicator lights and other parts of the seam welder are intact and undamaged, and ensure that the adjustment is convenient and the seam welding label information is clear and accurate.

3. Move the seam welder to the periphery of the welding area and cover the main power switch; turn on the power switch and cooling system of the seam welder to ensure that the cooling water channel of the circulating system is unobstructed, and then install the seam welder on the CNC machine tool. Press the main power switch to the ON position, select the main parameters of the electric welding according to the thickness of the raw material to be welded, adjust the main parameters of the seam welder, turn the "adjustment during work" power switch to the adjustment position, after the adjustment is completed, the seam welder power switch To the operating state, electric welding can be carried out.

The above is the content collected by the editor of the Plain Branch of Dezhou Dadong Machinery Co., Ltd. Please contact us if you need it. The company's main products are seam welding machine, automatic spiral duct production line, aluminum duct machine, full hydraulic round elbow forming machine, oval flat pipe machine, hydraulic elbow machine, spiral pipe coiling machine, spiral corrugated pipe machine, spiral Duct machine and so on. Dadong Machinery is engaged in special equipment for filtration, ventilation, dust removal, environmental protection, construction and other industries. After more than ten years of hard work and development, the company has become quite large-scale, strong in production and manufacturing, with a number of product patents, and sales channels throughout Guangxi, Xi’an, Inner Mongolia, Guangzhou, Hebei, Macau, Yuncheng, Liupanshui, Panzhihua, Tianshui, Xishuangbanna And other domestic and foreign markets such as Canada, Russia, Spain, India, the United Kingdom, Australia, Singapore and other machinery and equipment companies.